Sudden cardiac arrest strikes 7 million people a year worldwide with no warning and no pattern. There’s little time to react and even less time to think. This means an Automated External Defibrillator (AED) must be close at hand, easy to use and ready to shock.
The semi-automatic HeartSine samaritan PAD 350P and PAD 500P offer industry-leading value and environmental protection, all in an easy-to-operate system in the smallest and lightest package available.
PAD 500P defibrillator Provides the rescuer with real-time instructions regarding compressions with audible “Good Compressions” or “Push Harder” “Push Faster” and “Push Slower”. These instructions also are displayed on the face of the device in order to ensure the rescuer performs the most effective CPR.
Impedance Cardiogram (ICG) analysis is embedded in the software, which guides the user in the required force and speed of compressions for the victim. The ICG measures impedance changes in the chest cavity, which helps determine effective CPR. Because the ICG is related to how fast the compressions are applied, as well as how hard, the 500P can guide the user on both rate and depth.
After being instructed to “Begin CPR,” an audible beep for the appropriate cadence will help the rescuer keep time when performing compressions. The objective during CPR using the 500P is to hear “Good Compressions” and to see green on the CPR indicator.
Defibrillation is easy, CPR is the hard part. The HeartSine samaritan PAD 500P provides all the advantages of the 350P with the addition of an innovative CPR Advisor. Regardless of whether it is a lay person or a professional rescuer, the AHA/ERC guidelines place a greater emphasis on the importance of CPR and advocate the prompt initiation of effective bystander CPR to significantly reduce mortality due to out-of-hospital Cardiac Arrest.
Size: 20 cm x 18.4 cm x 4.8 cm
Weight: 2.4 lbs (1.1 kg)
Waveform: Self-Compensating Output Pulse Envelope (SCOPE) 0ptimized biphasic escalating waveform compensates energy, slope and duration for patient impedance
Warranty: 8-year limited warranty
Patient Analysis System
Method: Evaluates patient’s ECG, signal quality, electrode contact integrity and patient
impedance to determine if defibrillation is required
Sensitivity/Specificity: Meets IEC/EN 60601-2-4
Impedance Range: 20 - 230 ohms
Operating/Standby Temperature: 32°F to 122°F (0°C to 50°C)
14°F to 122°F (-10°C to 50°C) for up to two days. If the device has been stored below
0°C, it should be returned to an ambient temperature of between 0°C to 50°C for at least 24 hours before use.
Relative Humidity: 5% to 95% (non-condensing)
Enclosure: IEC/EN 60529 IP56
Altitude: 0 to 4,575 meters
Shock: MIL STD 810F Method 516.5, Procedure 1 (40 G’s)
Vibration: MIL STD 810F Method 514.5+, Procedure 1 Category 4 Truck Transportation - US Highways Category 7 Aircraft - Jet 737 & General Aviation